Xirgo XT4850C

Manufacturer:

Xirgo XT-4850C is an energy harvesting device supporting long term, remote deployments without the need to replace the self -charging battery. XT-4850C utilizes a highly efficient solar cell to continuously charge and maximize operating life of the internal Lithium Ion battery.

Customers who require frequent data for location, health and monitoring of their remote assets can be assured that the XT-4850C will provide more frequent data for longer periods compared to other asset tracking devices in the market today.

Xirgo XT4850C description

Xirgo XT-4850C is an energy harvesting device supporting long term, remote deployments without the need to replace the self -charging battery. XT-4850C utilizes a highly efficient solar cell to continuously charge and maximize operating life of the internal Lithium Ion battery.

Customers who require frequent data for location, health and monitoring of their remote assets can be assured that the XT-4850C will provide more frequent data for longer periods compared to other asset tracking devices in the market today.

Location and tracking

Xirgo XT4850C is embedded with GPS and doesn’t have support of GLONASS and alternative systems.

Designed to withstand various environmental factors, the XT-4850C is IP67 certified. With a fully sealed, protective case the device can be deployed in marine and desert environments.

Mobile networks

Xirgo XT4850C can be operated in CDMA netowrks, and is certified by such GSM carriers as Verizon and Sprint.

Features

Xirgo XT4850C has following features:

  • 1xRTT CDMA
  • CDMA Bands 800/1900 MHz
  • Integrated GPS receiver for tracking applications
  • Supports SMS , TCP, UDP, FTP, HTTP
  • Over-the-air application firmware upgrade
  • 8-pin circular bayonet connector with optional I/O’s
  • Configurable, periodic reporting to extend battery charge
  • 8 Mb Flash memory (upgrades available)
  • Accelerometer and motion sensor
  • Standard 10.6 Ah Lithium-Ion battery
  • 1-Wire® Bus
  • Zigbee®
  • AGPS Support

Optional Zigbee® transceiver, optional 1- Wire® Bus, and multiple inputs allow for interfacing with various sensors to further enhance the XT-4850C to be utilized in unique applications.

Power supply

External power supply might be 8-24V, which makes possible to use Xirgo XT4850C with all car models.

Xirgo XT4850C also features a built-in rechargeable 10600 mAh battery. When fully charged it ensures about 5-6 days of device operation (in normal conditions).

Local and remote management

Xirgo XT4850C can be configured and managed via SMS channel.

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47716
General information
PurposeVehicle
InstallationProfessional
Housing
Weight241 g (8.5 oz.)
Size116.3x73.1x42.4 mm (4.58x2.88x1.67 in)
Waterproof classIP67
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeCDMA2000 800/1900
Internal antenna (Connection)
Cellular network generation2G, 3G
Interfaces
Number of outputs1
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
OutputsFeature already supported
Feature already supported in
Hardware features
Battery capacity10600 mAh
Feature already supported in
Built-in battery
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
OdometerFeature already supported
Feature already supported in
ECO drivingFeature can be supported upon request
Feature can be supported upon request
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature can be supported upon request
Feature can be supported upon request
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Remote device configurationYes (over SMS)Feature already supported
Feature already supported in
Remote outputs controlYes (over SMS)Feature already supported
Feature already supported in
Firmware update OTA
Feature already supported in
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request
Certification
FCC
Feature can be supported upon request

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47716

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following command to the device:

+XT:1002,{apn_user},{apn_pass},{apn}
+XT:1001,47716,217.23.132.215,1
+XT:3001,1,1,1,1,0
+XT:3003,10
+XT:3007,6,6
+XT:3009,0,1,1
+XT:3010,180,0
+XT:3013,3,15
+XT:3014,1,5,3,0,0

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Xirgo XT4850C”