Vibrant Track IT01

Manufacturer:

A basic vehicle tracker for cars and motorcycles.

Vibrant Track IT01 description

A basic vehicle tracker for cars and motorcycles.

 

Location and tracking

  • GPS
  • Continuous tracking mode only
  • no LBS support

Mobile networks

  • Standard GSM quad-band
  • Only 2G networks

Inputs and outputs

  • Discrete input for ignition detection

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port46987
Interfaces
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Hardware features
Emergency buttonFeature can be supported upon request
Feature can be supported upon request
Hardware extras
Fuel level sensor readingFeature can be supported upon request
Feature can be supported upon request
Tracking features
Tracking modesContinuous
Feature can be supported upon request
Self monitoring
Network signal levelFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port46987

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

APN:{apn}*{apn_user}*{apn_pass}
TCP

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Vibrant Track IT01”