Totemtech AT06

Manufacturer:

AT06 is a GPS/GPRS based tracking device specially developed and designed for vehicle real-time tracking and fleet management. AT06 has inbuilt GPS module to obtain accurate position data and utilizes its GSM capability to send the position data to a specified mobile phone or server base for tracking and fleet management. With internal memory, AT06 can store data when there is no GPRS connection or at a specified interval requested by the user.

Totemtech AT06 description

AT06 is a GPS/GPRS based tracking device specially developed and designed for vehicle real-time tracking and fleet management. AT06 has inbuilt GPS module to obtain accurate position data and utilizes its GSM capability to send the position data to a specified mobile phone or server base for tracking and fleet management. With internal memory, AT06 can store data when there is no GPRS connection or at a specified interval requested by the user.

Location and tracking

  • GPS Support
  • Continuous and interval tracking modes
  • LBS Support

Mobile networks

  • 850/900/1800/1900 Mhz
  • 2G Network

Power supply

  • Build-in battery (800 mAh)
  • External power supply (12 – 24 V)

Inputs and outputs

  • 4 Discrete inputs
  • 2 Analog inputs
  • 4 Digital outputs

Other features

  • External emergency button
  • Remote management
  • RS485

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47701
General information
PurposeVehicle
InstallationProfessional
Housing
Weight250 g (8.82 oz.)
Size180x85x36 mm (7.09x3.35x1.42 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
Number of outputs4
Number of inputs (all types)6
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
Hardware features
Emergency buttonFeature already supported
Feature already supported in
Hardware extras
Voice listeningFeature can be supported upon request
Feature can be supported upon request
Emergency buttonFeature already supported
Feature already supported in
External temperature sensor readingFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous, Interval
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
OdometerFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Antenna cut offFeature already supported
Feature already supported in
Self monitoring
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)Feature already supported
Feature already supported in
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47701

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

*000000,011,{apn},{apnUser},{apnPassword}#
*000000,015,1,{server_ip},47701#

The {APN} parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Totemtech AT06”