Teltonika FMA202

Manufacturer:

FMA202 is a terminal with GPS and GSM connectivity, which is able to determine the object’s coordinates and transfer them via the GSM network. This device is perfectly suitable for applications, which need location acquirement of remote objects. It is important to mention that FMA202 has additional inputs and outputs, which let you control and monitor other devices on remote objects. FMA202 also has a USB port for device status log output and entering configurations.

Teltonika FMA202 description

FMA202 is a terminal with GPS and GSM connectivity, which is able to determine the object’s coordinates and transfer them via the GSM network. This device is perfectly suitable for applications, which need location acquirement of remote objects. It is important to mention that FMA202 has additional inputs and outputs, which let you control and monitor other devices on remote objects. FMA202 also has a USB port for device status log output and entering configurations.

Location and tracking

  • GPS, GLONASS, GALILEO, BEIDOU Support
  • Continuous tracking mode
  • LBS Support

Mobile networks

  • 850/900/1800/1900 MHz
  • 2G Network

Power supply

  • Build-in battery (400mAh Ni-MH)
  • External power supply (6-30 V)

Inputs and outputs

  • 3 Digital inputs
  • 1 Analog input
  • 2 Digital outputs

Other features

  • 1-Wire
  • Local and remote management
  • LED indication
  • Odometer
  • Offline tracking

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47776
General information
PurposeVehicle
InstallationProfessional
Housing
Size72.5x73x27.3 mm (2.85x2.87x1.07 in)
GNSS Location
Internal antenna (GNSS)
GPS
GLONASS
Connectivity
Cellular network typeHPSA/UMTS 850/900/1900/2100
Internal antenna (Connection)
Cellular network generation2G
Interfaces
1-Wire interface
Number of outputs2
Number of inputs (all types)4
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
Hardware extras
Driver ID readingFeature already supported
Feature already supported in
External temperature sensor reading
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
OdometerFeature already supported
Feature already supported in
ECO drivingFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)Feature already supported
Feature already supported in
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47776

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

 setparam 1242 {apn}
 setparam 1243 {apn_user}
 setparam 1244 {apn_pass}
 setparam 1245 {server_hostname}
 setparam 1240 1
 setparam 1246 47776
 setparam 1247 0
 setparam 1583 1
 setparam 1584 5
 setparam 1585 7F,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF
 setparam 1593 1
 setparam 1594 5
 setparam 1595 7F,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF
 setparam 201 1
 setparam 1580 180
 setparam 1590 60

The {APN} parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Teltonika FMA202”