Intellitrac X1

Manufacturer:

The IntelliTrac X1 GPS tracking device is a full scale GPS tracking device with rich capabilities. With the X1, users get a wide variety of choices for integrated sensors. Vehicles can report where they are and a lot of other useful data thanks to these features.

Intellitrac X1 description

The IntelliTrac X1 GPS tracking device is a full scale GPS tracking device with rich capabilities. With the X1, users get a wide variety of choices for integrated sensors. Vehicles can report where they are and a lot of other useful data thanks to these features.

Packaging content:

  • GSM Antenna
  • I/O / Power Combined Cable
  • Serial Cable

Features:

  • SMS, and GPRS TCP/UDP communication remote configuration
  • Real-time tracking (time, distance interval or intelliTrac mode)
  • Intelligent power management
  • GSM/GPRS simultaneously
  • Tow alarm
  • Firmware upgrade over the air (via GPRS)

Applications:

  • Vehicle Real-time Tracking
  • Vehicle Data Warehouse
  • Vehicle Security / Rescue / Anti-hijack
  • Mobile Asset Tracking
  • Fleet Management
  • Location Based Service

Specifications:

Communication Specification

  • Frequency 2G/GSM:Quad band, 850/900/1800/1900 MHz
  • Data Protocol:TCP, UDP,

Operating Temperature: -20℃~+70℃ (-4℉~158℉)

Input Ports:

  • 1 x ACC/Ignition Input
  • 3 x Digital Inputs
  • 1 x Analog Input

Output Ports:4 x Outputs

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port46986
General information
PurposeVehicle
InstallationProfessional
Housing
Weight80 g (2.82 oz.)
Size72x104.1x26.8 mm (2.83x4.1x1.06 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
Number of outputs4
Number of inputs (all types)4
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
OutputsFeature already supported
Feature already supported in
Hardware extras
Fuel level sensor readingFeature already supported
Feature already supported in
Emergency buttonFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous, Interval
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Self monitoring
GNSS signal levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)Feature already supported
Feature already supported in
Firmware update OTA
Feature already supported in
Forced LBS location update over GPRSFeature can be supported upon request
Feature can be supported upon request
Forced GNSS location update over SMSFeature already supported
Feature already supported in
Certification
CE
Feature already supported in
FCC
Feature already supported in

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port46986

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following command to the device:

$ST+COMM=0000,3,,,{apn},{apn_user},{apn_pass},1,217.23.132.215,46986,180,0.0.0.0
$ST+TRACKING=0000,1,60,100,0,1,3,1

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Intellitrac X1”