Intellitrac A1

Manufacturer:

The IntelliTrac A1 GPS tracking device is a full scale GPS tracking device with rich capabilities. With the A1, users get a wide variety of choices for integrated sensors. Vehicles can report where they are and a lot of other useful data thanks to these features.t.

Intellitrac A1 description

The IntelliTrac A1 GPS tracking device is a full scale GPS tracking device with rich capabilities. With the A1, users get a wide variety of choices for integrated sensors. Vehicles can report where they are and a lot of other useful data thanks to these features.

Packaging content:

  • GPS Antenna
  • GSM Antenna
  • I/O / Power Combined Cable
  • RS-232 Configuration Cable

Accessories

  • Back-up Battery
  • Mobile Data Terminal
  • Hands-free Kit
  • RFID Reader
  • Support CAN Bus Solution

Features:

  • SMS, and GPRS TCP/UDP communication remote configuration
  • Real-time tracking (time, distance interval or intelliTrac mode)
  • Intelligent power management
  • Built-in 3D G-sensor for vehicle motion
  • Power low/lost alarm
  • Backup battery power low alarm
  • Battery backup capacity for fully operation more than three days
  • Voice communication
  • Voice wiretapping
  • 50 geofencing report
  • Journey report wireless download
  • GSM/GPRS simultaneously
  • Tow alarm
  • 50 user defined reports alarm
  • Firmware upgrade over the air (via GPRS)
  • GPS antenna disconnect/cut alarm
  • Up to 120,000 data log storage

Applications:

  • Vehicle Real-time Tracking
  • Vehicle Data Warehouse
  • Vehicle Security / Rescue / Anti-hijack
  • Mobile Asset Tracking
  • Fleet Management
  • Location Based Service

Specifications:

  • Communication Specification
    • Frequency 2G/GSM:Quad band, 850/900/1800/1900 MHz
    • Data Protocol:TCP, UDP, SMS, Voice, USSD
  • GNSS Performance
    • Datum:WGS-84
    • Receiver type:72 channels ‧Sensitivity:-160 dBm; 26s
  • Power Consumption:
    • 49mA@12V DC (Operating Mode)
    • 10mA@12V DC (Standby Mode)
    • 6mA@12V DC (Sleep Mode)
  • Operating Temperature: -20℃~+70℃ (-4℉~158℉)
  • Interface:
  • Serial Ports:1 x RS-232 Port (Configurable baud rate)
  • Input Ports: 1 x ACC/Ignition Input
    • 5 x Digital Inputs (3 x Positive trigger & 2 x Negative triggers)
    • 1 x Analog Input (12-bit resolution)
  • Output Ports:3 x Outputs (Max. sink current 300mA)

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port46986
General information
PurposeVehicle
InstallationProfessional
Housing
Weight80 g (2.82 oz.)
Size72x104.1x26.8 mm (2.83x4.1x1.06 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
RS232 interfaceFeature already supported
Feature already supported in
Number of RS232 interfaces1
Feature already supported in
Number of outputs3
Feature already supported in
Number of inputs (all types)5
Feature already supported in
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
Impulse inputsFeature can be supported upon request
Feature can be supported upon request
OutputsFeature already supported
Feature already supported in
Hardware features
Battery capacity800 mAh
Feature already supported in
Built-in batteryFeature already supported
Feature already supported in
Hardware extras
Fuel level sensor readingFeature can be supported upon request
Feature can be supported upon request
Voice listeningFeature can be supported upon request
Feature can be supported upon request
Driver ID readingFeature already supported
Feature already supported in
External temperature sensor readingFeature can be supported upon request
Feature can be supported upon request
CameraFeature can be supported upon request
Feature can be supported upon request
Tracking features
Tracking modesContinuous
Feature can be supported upon request
OdometerFeature already supported
Feature already supported in
ECO drivingFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Car crashFeature already supported
Feature already supported in
TowingFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
Network operator IDFeature can be supported upon request
Feature can be supported upon request
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
CAN/OBDII reading
CAN/OBDII reader typeExternalFeature can be supported upon request
Feature can be supported upon request
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)Feature already supported
Feature already supported in
Firmware update OTA
Feature already supported in
Forced LBS location update over GPRSFeature can be supported upon request
Feature can be supported upon request
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request
Certification
CE
Feature can be supported upon request
FCC
Feature can be supported upon request

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port46986

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following command to the device:

AT$MODID={ID}
AT$APN={apn},{apn_user},{apn_pass}
AT$HOSTS=1,0,217.23.132.215,46986

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Intellitrac A1”