Satellite Solutions SAT_LITE 2

Manufacturer:

SAT-LITE 2 is a tracker, which allows to monitor various parameters of the vehicle and the equipments installed on it. SAT-LITE 2 has discrete inputs, 2 of them are universal pulse-frequency inputs. Also SAT-LITE 2 tracker allows two-way communication between dispatcher and driver. The device has three operation modes: “Sleep”, “Active” and “Roaming”, user is able to choose any mode for comfortable monitoring.

Satellite Solutions SAT_LITE 2 description

SAT-LITE 2 is a tracker, which allows to monitor various parameters of the vehicle and the equipments installed on it. SAT-LITE 2 has discrete inputs, 2 of them are universal pulse-frequency inputs. Also SAT-LITE 2 tracker allows two-way communication between dispatcher and driver. The device has three operation modes: “Sleep”, “Active” and “Roaming”, user is able to choose any mode for comfortable monitoring.

Location and tracking

  • GPS, GLONASS support
  • Continuous tracking mode
  • LBS support

Mobile networks

  • 2G Network

Power supply

  • Build-in battery (400 mAh)
  • External power supply (7 – 44V)

Inputs and outputs

  • 3 Discrete inputs
  • 1 Analog input
  • 1 Output

Other features

  • External emergency button support
  • Loacal and remote management
  • LED indication

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47722
General information
PurposeVehicle
InstallationProfessional
Housing
Weight115 g (4.06 oz.)
Size94x94x28 mm (3.7x3.7x1.1 in)
GNSS Location
External antenna (GNSS)
GPS
GLONASS
Connectivity
Cellular network typeGSM Quad Band
External antenna (Connection)
Cellular network generation2G
Interfaces
1-Wire interface
RS485 interface
Number of outputs1
Number of inputs (all types)4
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
Impulse inputsFeature already supported
Feature already supported in
Frequency inputsFeature already supported
Feature already supported in
Hardware features
Emergency buttonFeature can be supported upon request
Feature can be supported upon request
Hardware extras
Fuel level sensor readingFeature already supported
Feature already supported in
Voice listeningFeature can be supported upon request
Feature can be supported upon request
Driver ID readingFeature already supported
Feature already supported in
External temperature sensor readingFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
Network operator IDFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over SMS)Feature already supported
Feature already supported in
Remote outputs controlYes (over SMS)
Feature already supported in
Forced GNSS location update over SMSFeature already supported
Feature already supported in

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47722

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

AT+SGDT=1234,<apn>,<apn_user>,<apn_password>,  
AT+SMSD=1234,<ip>,47722,
AT+SASD=1234,<ip>,47722,
AT+SMTD=1234,60,300,60,300,,,30,
AT+SAVE=1234,

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Satellite Solutions SAT_LITE 2”