Sanfone SF700

san

Manufacturer:

SF100 is a practical tracking device designed for vehicle or asset tracking applications. It has high sensitive built-in GPS receiver. Its quad band 850/900/1800/190MHz GSM/GPRS subsystem allows the device location to be monitored in real time or periodically tracked by backend server, cloud center or mobile devices.

Sanfone SF700 description

SF700 is a powerful tracking device designed for a wide variety of vehicle or asset tracking applications. It has high performance automotive level ARM MCU. Its high sensitive built-in GPS receiver supports fast position fix. Its quad band 850/900/1800/190MHz GSM/GPRS subsystem allows the device location to be monitored in real time or periodically tracked by backend server, cloud center or mobile devices. It has multiple I/O interfaces that can be used to monitor or control other devices on remote objects. It also has a USB port for device configurations, firmware upgrading and status log output. Its built-in sensor allows motion detection and extends battery life through sophisticated power management algorithm. System integration is straightforward by the full featured Air Interface Protocol. The Air Interface Protocol supports a wide variety of reports including scheduled position, I/0 interface, driver behavior, low battery and signal jamming etc. The device is perfectly suitable for applications for fleet management, car rental companies, taxi companies, public transport, logistics companies and personal cars etc.

Location and tracking

  • High sensitive GPS module with optional GLONASS or Beidou support
  • Continuous tracking mode
  • LBS support with one tower

Mobile networks

  • Standard quad-band GSM 850/900/1800/1900 MHz
  • Only 2G networks

Power supply

  • Rechargeable built-in 1100mA li-polymer battery
  • DC 9-32V power supply range

Inputs and outputs

  • 2 digital inputs for negative triggering
  • 2 digital inputs for status monitoring
  • 3 analog inputs for fuel sensor
  • 2 digital outputs for relays, LED, buzzers or door sensor etc
  • 1 RS232 port for RFID reader, camera and handset etc

Other features

  • Emergency button
  • LED indication
  • Robust alluminium alloy case
  • Voice monitoring
  • OTA firmware upgrades

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port46983
Housing
Weight187 g (6.6 oz.)
Size132x64x28 mm (5.2x2.52x1.1 in)
Interfaces
1-Wire interface
Number of RS232 interfaces1
Number of outputs2
Number of inputs (all types)9
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
Hardware features
Emergency buttonFeature already supported
Feature already supported in
Hardware extras
Voice listeningFeature can be supported upon request
Feature can be supported upon request
Driver ID readingFeature already supported
Feature already supported in
External temperature sensor readingFeature already supported
Feature already supported in
CameraFeature can be supported upon request
Feature can be supported upon request
Tracking features
Tracking modesContinuous
Feature can be supported upon request
Location by Cell IDFeature already supported
Feature already supported in
OdometerFeature already supported
Feature already supported in
ECO drivingFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Car crashFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)Feature already supported
Feature already supported in
Forced LBS location update over GPRSFeature can be supported upon request
Feature can be supported upon request
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port46983

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

*667766,B40,0;217.23.132.215;46983#
*667766,B42,{apn};{apn_user};{apn_pass}#
*667766,B00,1#

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Sanfone SF700”