RedView VT680

Manufacturer:

RedView VT680 is designed for high-end application, such as tracking heavy transport, taxis, for use as a black box application, and many more. It has a variety of inputs and outputs, and support CAN bus data reading.

RedView VT680 description

Location and tracking

The device support only continuous GPS mode. It doesn’t support LBS location, so it’s recommended for use in the ares with strong GPS singal.

Mobile networks

Standard quad-band 850/900/1800/1900Mhz. The device doesn’t support 3G network. The device also support Wi-fi and Bluetooth networks.

Power supply

The device have internal battery, which can be used when external power supply is not available.

Inputs and outputs

The device has 4 digital inputs, 4 digital outputs, 2 analog inputs, and 3 serial RS232 port. With CAN bus bridge, the device can read vehicle status data.

Emergency button

The device have an emergency button which can be used to send the SOS signal to the server.

GSM jamming detection

The device feature a GSM antenna tamper or jamming detection, and can send alarms on detection of such events.

Optional Accessory:

Relay
Fuel sensor
Temperature sensor
RFID reader
Camera
2 ways voice kits
CAN/OBD bridge
SD card
Mobile data terminal
Barcode scanner
RS232 bluetooth adapter

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port46997
Housing
Weight670 g (23.63 oz.)
Size113x78x35 mm (4.45x3.07x1.38 in)
Interfaces
1-Wire interfaceFeature can be supported upon request
Feature can be supported upon request
RS232 interfaceFeature can be supported upon request
Feature can be supported upon request
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
Frequency inputsFeature can be supported upon request
Feature can be supported upon request
Hardware features
Emergency buttonFeature can be supported upon request
Feature can be supported upon request
Hardware extras
Fuel level sensor readingFeature already supported
Feature already supported in
Voice listeningFeature can be supported upon request
Feature can be supported upon request
Driver ID readingFeature can be supported upon request
Feature can be supported upon request
External temperature sensor readingFeature already supported
Feature already supported in
CameraFeature can be supported upon request
Feature can be supported upon request
Tracking features
Tracking modesContinuous
Feature can be supported upon request
OdometerFeature already supported
Feature already supported in
ECO drivingFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Self monitoring
GNSS signal levelFeature already supported
Feature already supported in
CAN/OBDII reading
CAN/OBDII reader typeFeature can be supported upon request
Feature can be supported upon request
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port46997

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

W000000,010,1234567890
W000000,011,{apn},{apn_user},{apn_pass}
W000000,012,{server_ip},46997
W000000,036,30

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “RedView VT680”