Queclink GV50VC

Manufacturer:

The GV50VC is a powerful GPS locator designed for vehicle or asset tracking. It has superior receiver sensitivity and supports Dual-Band CDMA2000-1x frequencies 800/1900, and its location can be monitored in real time or periodically tracked by a backend server or other specified terminals. The GV50VC has multiple input/output interfaces that can be used for monitoring or controlling external devices. The GV50VC can communicate with a backend server through the CDMA2000-1x network over which it transfers reports of emergency, geo-fence boundary crossings or scheduled GPS position as well as many other useful functions. Users can also use GV50VC to monitor the status of a vehicle and control the vehicle by its external relay output.

Queclink GV50VC description

GV55VC is a simple GPS device for basic vehicle tracking. It has built-in antennas only, which makes the installation process very easy. Unfortunately, it doesn’t have an internal backup battery.

Product Features

  • Easy installation thanks to compact size and built-in antennas
  • Dual-band CDMA2000 1xRTT frequencies 800/1900 MHz, 3G support
  • 8..32V voltage range (good for trucks and buses with 24V power)
  • Harsh driving monitoring
  • Tow detection
  • Adjustable tracking modes
  • One positive trigger for ignition detection
  • One digital output, open drain, 150 mA max drive current
  • One buzzer output control or negative trigger input can be software configured

Cons

  • No backup battery
  • No sockets for external antennas
  • No waterproof category
  • No digital interfaces – means no possibility to connect digital devices, i.e. fuel level sensors or camera.

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47672
Integrated on06.01.2018
General information
PurposeVehicle
InstallationDIY
Housing
Weight50 g (1.76 oz.)
Size87x55x12 mm (3.43x2.17x0.47 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeCDMA2000 800/1900
Internal antenna (Connection)
Cellular network generation3G
Interfaces
Number of outputs2
Number of inputs (all types)2
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
OutputsFeature already supported
Feature already supported in
Hardware features
Accelerometer
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
OdometerFeature already supported
Feature already supported in
ECO drivingFeature already supported
Feature already supported in
Events monitoring
Input changeFeature already supported
Feature already supported in
Car crashFeature already supported
Feature already supported in
TowingFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
GNSS satellites fixedFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)Feature already supported
Feature already supported in
Firmware update OTA
Feature already supported in
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47672
Integrated on06.01.2018

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following command to the device:

AT+GTQSS=gv50vc,{apn},{apn_user},{apn_pass},3,,2,{server_ip},47672,{server_hostname},47672,,10,0,,,0001$

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Queclink GV50VC”