Pretrace TC80

Manufacturer:

Pretrace TC80 is optimized for assets tracking. It will operate autonomously for more than 300 days under optimal configuration, which is an ideal self-contained device for long term tracking deployments. Its built-in 3-axis G-sensor allows TC80 to detect asset movement and transmit an alert message. Its friendly thin size (13.6mm) design can be easily hang it up on the neck, use like an access card, or fix it on the objects, which is easy hidden.

Pretrace TC80 description

Pretrace TC80 is optimized for assets tracking. It will operate autonomously for more than 300 days under optimal configuration, which is an ideal self-contained device for long term tracking deployments. Its built-in 3-axis G-sensor allows TC80 to detect asset movement and transmit an alert message. Its friendly thin size (13.6mm) design can be easily hang it up on the neck, use like an access card, or fix it on the objects, which is easy hidden.

Packaging content:

  • TC80 tracking device
  • User manual

Features:

  • Long Standby Time up to 300 Days
  • Easy installation
  • Internal 3-axis G-sensor for Motion Detection
  • Quad band 850/900/1800/1900 MHz
  • GPS and GSM Base Station Bi-Module Positioning
  • Low Power Consumption with Inbuilt Battery
  • Internal GSM/GPS Antennas for Easy Installation
  • Low Battery Alarm by SMS
  • OTA (Firmware Update via Wireless)
  • CE/RoHS Certified

Applications:

  • Asset tracking
  • Transportation tracking

Specifications:

  • Power Consumption: on average 15μA
  • Standby time: 5 minuted Reporting: More than 85 hrs

GSM Module:

  • Dual/Quard Band GSM 850/900/1800/1900 MHz
  • GPRS multi-slot class 10/8
  • GPRS mobile station class B
  • Class 4 (2W @ 850/900 MHz)

GPS Module:

  • Accuracy: <2.5m
  • Sensitivity: -165dBm

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port46985
General information
PurposeVehicle
InstallationProfessional
Housing
Weight75 g (2.65 oz.)
Size13.6x59x88 mm (0.54x2.32x3.46 in)
GNSS Location
Internal antenna (GNSS)
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Hardware features
Battery capacity3000 mAh
Built-in batteryFeature already supported
Feature already supported in
Internal temperature sensorFeature can be supported upon request
Feature can be supported upon request
Tracking features
Tracking modesContinuous
Feature can be supported upon request
Location by Cell IDFeature can be supported upon request
Feature can be supported upon request
OdometerFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature can be supported upon request
Feature can be supported upon request
Internal battery levelFeature can be supported upon request
Feature can be supported upon request
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Firmware update OTA
Feature already supported in
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request
Certification
CE
Feature can be supported upon request
FCC
Feature can be supported upon request

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port46985

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following command to the device:

pw123456,apn={apn},{apn_user},{apn_pass}

pw123456,server=217.23.132.215,46985

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Pretrace TC80”