Portman GT3101

Manufacturer:

Portman GT3101 integrates GPS tracking functions and basic car alarm control functions into one unit. You can monitor the vehicle location and control the car alarm remotely. In addition, the unit will send event report if any triggers occur. It has built-in 7 outputs and 2 inputs to perform essential alarm and tracking functions.

Portman GT3101 description

Portman GT3101 integrates GPS tracking functions and basic car alarm control functions into one unit. You can monitor the vehicle location and control the car alarm remotely. In addition, the unit will send event report if any triggers occur. It has built-in 7 outputs and 2 inputs to perform essential alarm and tracking functions.

Package contents

Portman GT3101 is supplied to the customer in a cardboard box containing all the equipment that is necessary for operation.

The standard package contains:

  • Main unit
  • Operation manual
  • Wire harness
  • Build-in tiled sensor
  • PC-setup Cable
  • Built-in 300mA lithium-ion battery

Location and tracking

Portman GT3101 is embedded with GPS, it doesn’t support GLONASS or alternative systems.

Device supports either continuous or interval tracking mode.

Mobile networks

Portman GT3101 has a Quad-band GSM 2G that allows to operate it all over the world.

Power supply

GT3101 features a rechargeable 300 mAh battery. When fully charged it ensures about 3-5 hours of device operation (in normal conditions).

Local and remote management

GT3101 can be fully controlled over GPRS. There is also a wide list of SMS commands in a human-friendly format, on which device always replies back. It supports remote APN settings configuration by SMS.

LED Indication

Portman GT3101 has three LED indicating:

  • Power
  • GSM/GPRS signal
  • GPS signal reception

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47741
General information
PurposeVehicle
InstallationProfessional
Housing
Weight50 g (1.76 oz.)
Size90x52x15 mm (3.54x2.05x0.59 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
Number of outputs7
Number of inputs (all types)2
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
OutputsFeature already supported
Feature already supported in
Hardware features
Battery capacity300 mAh
Feature already supported in
Built-in battery
Feature already supported in
Hardware extras
Fuel level sensor readingFeature already supported
Feature already supported in
Driver ID readingFeature can be supported upon request
Feature can be supported upon request
Tracking features
Tracking modesContinuous, Interval
Feature can be supported upon request
OdometerFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
CAN/OBDII reading
CAN/OBDII reader typeExternalFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)Feature already supported
Feature already supported in
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request
Certification
CE
Feature can be supported upon request
FCC
Feature can be supported upon request

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47741

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual configuration

If the automatic activation failed, you can point the device to the server manually by sending these commands to the device:

  • &&1234567890,Z10,{apn},{apn_user},{apn_pass}
  • &&1234567890,Z39,1,217.23.132.215,47741,1

<APN> – your local GSM-provider APN

<User>,<Password> – your local GSM-provider user and password for APN

Reviews

There are no reviews yet.

Be the first to review “Portman GT3101”