Navtelecom Smart S-2331

Manufacturer:

Navtelecom SMART S-2331 is a GPS/GLONASS monitoring unit, which has RS-232 and 1-wire input. S-2331 has a built-in battery and a microphone.

Navtelecom Smart S-2331 description

Navtelecom SMART S-2331 is a GPS/GLONASS monitoring unit, which has RS-232 and 1-wire input. S-2331 has a built-in battery and a microphone.

Package contents

Package contents include:

  • Device
  • 14-pin cable (harness) type Microfit-14
  • Interface cable with a MiniUSB connector
  • CD with software and documentation
  • Packaging

Location and tracking

Navtelecom SMART S-2331 model is embedded with GPS and has the support of GLONASS system. As a backup it uses Cell-ID or LBS services to get the location of the unit.

Mobile networks

With Quad-band GSM 2G module Navtelecom SMART S-2331 can be operated all over the world.

Power supply

External power supply might be 8.5 – 48V, with an over-voltage protection, which makes possible to install S-2331 both on cars and vans.

S-2331 also features built-in rechargeable backup battery. When fully charged it ensures about 4-6 hours of device operation (in normal conditions).

Local and remote management

Navtelecom SMART S-2331 can not be controlled over GPRS, the configuration should be made by using special software “NTC Configurator”.

Features

Navtelecom SMART S-2331 has following features:
  • Real Time Tracking
  • Remote outputs control
  • The support of FLEX-protocol for traffic economy
  • 1-wire
  • RS-232 sensor
  • EGTS Protocol support
  • Internal battery

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47709
General information
PurposeVehicle
InstallationProfessional
Housing
Weight85 g (3 oz.)
Size102х57х22 mm (4.02x2.24x0.87 in)
Waterproof classIP5X
GNSS Location
Internal antenna (GNSS)
GPS
GLONASS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
1-Wire interface
RS232 interface
Number of RS232 interfaces1
Number of outputs2
Number of inputs (all types)4
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
Impulse inputsFeature can be supported upon request
Feature can be supported upon request
Frequency inputsFeature can be supported upon request
Feature can be supported upon request
OutputsFeature already supported
Feature already supported in
Hardware features
Battery capacity1050 mAh
Feature already supported in
Built-in battery
Feature already supported in
Emergency buttonFeature already supported
Feature already supported in
Hardware extras
Fuel level sensor readingFeature already supported
Feature already supported in
Emergency buttonFeature already supported
Feature already supported in
Driver ID readingFeature can be supported upon request
Feature can be supported upon request
External temperature sensor readingFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
OdometerFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Mobile signal jammingFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
CAN/OBDII reading
CAN/OBDII reader typeFeature already supported
Feature already supported in
CAN/OBDII parametersFuel level, fuel consumption, engine RPM, throttle position, speed, coolant temperature and other
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote outputs controlYes (over SMS)Feature already supported
Feature already supported in
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request
Certification
CE
Feature can be supported upon request
FCC
Feature can be supported upon request

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47709

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following command to the device:

SET1 217.23.132.215 47709
SET2 <apn> <apn_user> <apn_password> FLEX

The <APN> parameters depend on your GSM carrier.

 

Reviews

There are no reviews yet.

Be the first to review “Navtelecom Smart S-2331”