MRD-100

Manufacturer:

MRD-100 is the tracker with the basic functionality. It uses GSM quad band wich is used all over the world. Working based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets via SMS or GPRS connection.

MRD-100 description

MRD-100 is the tracker with the basic functionality. It uses GSM quad band wich is used all over the world. Working based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets via SMS or GPRS connection.

Location and tracking

  • Continuous tracking mode

Mobile networks

  • 850/900/1800/1900 Mhz
  • 2G Network

Power supply

  • Build-in battery
  • External power supply (12-24V)

Inputs and outputs

  • ACC input

Other features

  • Hidden type of the installation
  • LED indication
  • Compact size

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47735
General information
PurposeVehicle
InstallationProfessional
Housing
Weight50 g (1.76 oz.)
Size90x49.3x16.7 mm (3.54x1.94x0.66 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
Number of outputs1
Number of inputs (all types)1
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)Feature already supported
Feature already supported in
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47735

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device via SMS:

begin123456
apn123456 {apn} {apn_user} {apn_pass}
UDP123456 0
GPRS123456 1
timezone123456 0
adminip123456 {server_ip} 47735

The {APN} parameters depend on your GSM carrier.

Via GPRS:

D1,000000,31

Reviews

There are no reviews yet.

Be the first to review “MRD-100”