Micron Prime ATC

Manufacturer:

Micron Prime ATC can be used for a variety of applications including monitoring assets, independent workers, children, and retail loss prevention. Reliably accurate and easy to deploy, the Prime ATC features an extra large internal antenna, a superior GPS, a 2000mAh battery, ultra-low power sleep mode, and automatic over-the-air configuration.

Micron Prime ATC description

Micron Prime ATC can be used for a variety of applications including monitoring assets, independent workers, children, and retail loss prevention. Reliably accurate and easy to deploy, the Prime ATC features an extra large internal antenna, a superior GPS, a 2000mAh battery, ultra-low power sleep mode, and automatic over-the-air configuration.

 

Location and tracking

  • GPS only
  • Continuous and interval modes

Mobile networks

  • CDMA: 800/1900 MHz
  • 2G and 3G

Power supply

  • 2000 mAh Li-ion built-in battery

Other features:

  • Wireless Charging
  • Ultra-low Power Sleep Mode
  • LED indication

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47764
Housing
Weight72 g (2.54 oz.)
Size71x42x23 mm (2.8x1.65x0.91 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeCDMA2000 800/1900
Internal antenna (Connection)
Cellular network generation2G, 3G
Hardware features
Emergency buttonFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous, Interval
Feature already supported in
Location by Cell IDFeature can be supported upon request
Feature can be supported upon request
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS), Yes (over SMS)Feature already supported
Feature already supported in
Forced GNSS location update over SMSFeature already supported
Feature already supported in

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47764

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following command to the device via SMS:

AT+GTQSS=AIR11,<apn_name>,<apn_user_name>,<apn_password>,3,,1,<main_server_ip>,47764,<backup_server_ip>,47764,<sms_gateway>,10,0,,,0001$

The <APN> parameters depend on your GSM carrier.

Via GPRS:

AT+GTCFG=AIR11,,,,1,1,2,,,,0823,,,1,600,0,,,,,,0002$
AT+GTFRI=AIR11,1,2,,254,0000,0000,600,1,600,1,,,,,,,,,,0003$
AT+GTNMD=AIR11,E,40,,3,900,1,0,120,,,,,,0004$

Reviews

There are no reviews yet.

Be the first to review “Micron Prime ATC”