Micron Prime AT Plus 2G

Manufacturer:

Micron Prime AT Plus 2G is a compact device which can be used for monitoring assets, independent workers, children and relatives. Micron Prime AT Plus 2G supports 2G network for data transmitting, has a 2000 mAh Li-ion battery and superior GPS performance.

Micron Prime AT Plus 2G description

Micron Prime AT Plus 2G is a compact device which can be used for monitoring assets, independent workers, children and relatives. Micron Prime AT Plus 2G supports 2G network for data transmitting, has a 2000 mAh Li-ion battery and superior GPS performance.

Location and tracking

  • Continuous and interval tracking modes
  • LBS support

Mobile networks

  • 850/900/1800/1900 MHz
  • 2G Network

Power supply

  • Build-in battery (Lithium-Ion 1300/2000 mAh)

Inputs and outputs

  • 1 Discrete input
  • 1 Discrete output

Other features

  • Superior GPS Performance
  • LED indication

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47764
General information
PurposeVehicle
InstallationNot required
Housing
Weight76 g (2.68 oz.)
Size64.75x41.3x25.9 mm (2.55x1.63x1.02 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM 850/900/1800/1900, HPSA/UMTS 850/900/1900/2100
Internal antenna (Connection)
Cellular network generation3G
Interfaces
Number of outputs1
Number of inputs (all types)1
Discrete inputsFeature can be supported upon request
Feature can be supported upon request
Hardware features
Emergency buttonFeature already supported
Feature already supported in
Hardware extras
Emergency buttonFeature already supported
Feature already supported in
External temperature sensor reading
Feature already supported in
Tracking features
Tracking modesContinuous, Interval
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Device switched on/offFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Forced GNSS location update over SMSFeature already supported
Feature already supported in

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47764

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device via SMS:

AT+GTQSS=AIR11,<apn_name>,<apn_user_name>,<apn_password>,3,,1,<main_server_ip>,47764,<backup_server_ip>,47764,<sms_gateway>,10,0,,,0001$

The <APN> parameters depend on your GSM carrier.

Via GPRS:

AT+GTCFG=AIR11,,,,1,1,2,,,,0823,,,1,600,0,,,,,,0002$
AT+GTFRI=AIR11,1,2,,254,0000,0000,600,1,600,1,,,,,,,,,,0003$
AT+GTNMD=AIR11,E,40,,3,900,1,0,120,,,,,,0004$

Reviews

There are no reviews yet.

Be the first to review “Micron Prime AT Plus 2G”