Meitrack T1

Manufacturer:

Meitrack T1 is a solid GPS tracker for vehicles with the digital interfaces that can be used for installation of a camera, LED/LCD displays or for the other advanced features.

SKU: 715286c4c82c.

Meitrack T1 description

Meitrack T1 is a solid GPS tracker for vehicles with the digital interfaces that can be used for installation of a camera, LED/LCD displays or for the other advanced features.

The device has a microphone and a speaker for the voice communication.

It has the GPS and GSM antennas that can provide the tracking accuracy about 10 meters.

Location and tracking

Meitrack T1 model is embedded with GPS chip. It supports Assisted GPS (A-GPS) technology. As the back-up, when no satellites signals are available, it uses Cell ID location (also known as LBS-tracking).

The tracking mode is flexible and can be configured depending on distance, time and angle. The default parameters set by the system are 100m,  60 sec,  30 degrees. When there is no movement, tracker sends data every 180 seconds.

Interfaces

  • 3 digital inputs (2 negative inputs and 1 positive input)
  • 2 analog detection inputs
  • 2 outputs
  • 1 RS232 port
  • 1 USB port
  • 1-wire temperature sensor and 1 iButton Driver ID

Accessories

The manufacturer offers different accesories, such as:

  • Camera Handset
  • RFID reader
  • A21 LCD display (dialing and SMS display)
  • A53 fuel sensor
  • A52 digital temperature sensor + A61 sensor box
  • LED display
  • iButton

Mobile networks

With Quad-band GSM 2G module Meitrack T1 can be operated all over the world.

Power supply

T1 uses voltage range 11-36V, which makes possible to install it both on cars and trucks. Device also features a built-in rechargeable backup battery. When fully charged it ensures about 3 hours of device operation (in normal conditions).

Local and remote management

Meitrack devices support management via GPRS. Also, there is a wide list of SMS commands, on which device always replies back. In particular, Server address and port, APN settings can be applied remotely with SMS.

LED Indication

Meitrack T1 has two status LEDs:

  • Status LED: indicates GSM/GPRS mode
  • Navigate LED: indicates GPS reception

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47752
Integrated on19/03/2015
Revised on19/03/2015
General information
PurposeVehicle
InstallationProfessional
Housing
Weight190 g (6.7 oz.)
Size105x65x26 mm (4.13x2.56x1.02 in)
GNSS Location
External antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
External antenna (Connection)
Cellular network generation2G
Interfaces
1-Wire interface
RS232 interface
Number of RS232 interfaces1
Number of outputs2
Number of inputs (all types)5
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
OutputsFeature already supported
Feature already supported in
Hardware features
Battery capacity850 mAh
Feature already supported in
Built-in battery
Feature already supported in
Hardware extras
Fuel level sensor readingFeature already supported
Feature already supported in
Driver ID readingFeature already supported
Feature already supported in
External temperature sensor readingFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
Input changeFeature already supported
Feature already supported in
Antenna cut offFeature already supported
Feature already supported in
Device switched on/offFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
GNSS satellites fixedFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)
Feature already supported in
Remote outputs controlYes (over GPRS)
Feature already supported in
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request
Certification
CE
Feature can be supported upon request
FCC
Feature can be supported upon request
EAC
Feature can be supported upon request

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47752
Integrated on19/03/2015
Revised on19/03/2015

Reviews

There are no reviews yet.

Be the first to review “Meitrack T1”