Manufacturer:

KingNeed Magnet GPS Tracker is a flexible personal security device with multi-usage. Uses a unique blend of GPS, GSM, and Wi-Fi technology to help user locate their values both indoors and out.

Kingneed TK-20 description

KingNeed Magnet GPS Tracker is a flexible personal security device with multi-usage. Uses a unique blend of GPS, GSM, and Wi-Fi technology to help user locate their values both indoors and out.

Product features:

  • 20000 mAh Lithium-Polymer battery
  • Maximum 1600 days working time
  • Motion alert and Drop-trigger alert build-in
  • WiFi indoor locate with 10-50 meter position accuracy
  • Support up to 32G byte memory card extend
  • No installation need, easy attach to any iron surface
  • AGPS+WiFi+GSM mix advanced location technology
  • Water-Proof design with strong magnets built-in

Location and tracking

  • GPS
  • A-GPS
  • LBS

Mobile networks

  • GSM 850/900/1800/1900
  • 2G Network

Power supply

  • Build-in battery (20000 mAh Li-Po)
  • Up to 1600 days working time

Local and remote management

  • Remote GPRS commands
  • Server connection setup over SMS

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port46982
General information
PurposeAsset, Vehicle
InstallationDIY
Housing
Weight569 g (20.07 oz.)
Size153x58x45 mm (6.02x2.28x1.77 in)
Waterproof classIPX7
Magnet mounting
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM 850/900/1800/1900
Internal antenna (Connection)
Cellular network generation2G
Hardware features
Battery capacity20000 mAh
Built-in battery
Emergency buttonFeature already supported
Feature already supported in
Detach sensorFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous, Interval
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
Smart power consumptionFeature already supported
Feature already supported in
Self monitoring
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Forced GNSS location update over SMSFeature already supported
Feature already supported in
Certification
EAC
Feature already supported in

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port46982

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following command to the device:

*apn*{apn}*{apn_user}*{apn_pass}*
*setip*217*23*132*215*46982*
*master*123456*{phone number of the gateway from which the server will send SMS commands to the device}*@GPRS*

The <APN> parameters depend on your GSM carrier, as well as the SMS gateway.

Reviews

There are no reviews yet.

Be the first to review “Kingneed TK-20”