Jin Sheng JS810

Manufacturer:

JS810 vehicle tracker is the perfect combination of GSM communication technology and GPS satellite positioning technology. With precise size and simple appearance, this product shows the advanced technology in the field of GSM and GPS.

Jin Sheng JS810 description

JS810 vehicle tracker is the perfect combination of GSM communication technology and GPS satellite positioning technology. With precise size and simple appearance, this product shows the advanced technology in the field of GSM and GPS.

This vehicle tracker is a remote vehicle positioning device consisting of a GPS module and a GSM/GPRS module, which is featured by compact size, good concealment and high precision. It can provide the GPS satellite positioning information, and can also provide the positioning information supported by the GSM base station if the GPS satellite information is unavailable, and the information about the latitude and longitude coordinates can be sent to the system platform and the preset mobile phone number. You can make use of these features to locate and manage your vehicle.

Location and tracking

  • GPS navigation system
  • Continuous and interval tracking modes
  • LBS support using one cell tower

Mobile networks

  • 2G only

Power supply

  • Power supply 9-58V DC

Inputs and outputs

  • Ignition status input
  • In-built 4-pin relay

Other features

  • Optional emergency button
  • Optional microphone

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47733
General information
PurposeVehicle
InstallationProfessional
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
Number of inputs (all types)1
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Hardware features
Emergency buttonOptionalFeature already supported
Feature already supported in
Hardware extras
Voice listeningFeature can be supported upon request
Feature can be supported upon request
Tracking features
Tracking modesContinuous, Interval
Feature can be supported upon request
Location by Cell IDFeature can be supported upon request
Feature can be supported upon request
ECO drivingFeature already supported
Feature already supported in
Events monitoring
External power cut offFeature already supported
Feature already supported in
Self monitoring
GNSS signal levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47733

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

#802#{apn}#{apn_user}#{apn_pass}#0000##
#803#{server_ip}#47733#0000##

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Jin Sheng JS810”