IMTSA TR2-OBD

Manufacturer:

IMTSA TR2-OBD is a Vehicle GPS Tracker with OBD II (On-Board-Diagnostics) with SAE J1939 CAN functions.

IMTSA TR2-OBD description

IMTSA TR2-OBD is a Vehicle GPS Tracker with OBD II (On-Board-Diagnostics) and SAE J1939 CAN functions.

Its built-in 3-axis accelerometer allows motion detection and extends backup battery life, and its GPS receiver have superior sensitivity and fast time to first track driver behavior detection such as cornering,hard braking,speed and location.

Location and tracking

IMTSA TR2-OBD is embedded with GPS and doesn’t have support of GLONASS and alternative systems. It either doesn’t support Assisted GPS (A-GPS) technology.

With a highly sensitive GPS engine along with an integrated GPS antenna and multiple OBDII protocols supported, IMTSA TR2-OBD can be installed in the majority of vehicles.

Mobile networks

The support of 2G GSM Quad-band network allows TR2-OBD location to be monitored in real time or periodically tracked by a backend server and mobile devices.

Features

IMTSA TR2-OBD has following features:

  • OBD connectivity, simple to install, easy to use.
  • Quad band GSM modem, 850/900/1800/1900 MHz.
  • U-blox 6M GPS module with A-GPS.
  • Internal GSM/GPS antenna.
  • Internal Immobilizer for anti-theft.
  • Internal 3-axis accelerometer.
  • Supports all OBD protocols.
  • Supports SAE J1939 CANBUS protocol.
  • Support SAE J1708/J1587 protocol.
  • 8 types driver behavior detect.
  • Tracking by time, distance, course and status.
  • Geo-fence(Circle, Rectangular and Polygon).
  • FOTA(Firmware updating via GPRS from FTP server).
  • Auto APN identification.
  • Auto time zone identification.
  • Voice monitor.

Power supply

External power supply might be 8-32V, which makes possible to use IMTSA TR2-OBD with all car models.

Local and remote management

IMTSA TR2-OBD tracker can be fully controlled over GPRS. There is also a wide list of SMS commands in a human-friendly format, on which device always replies back. It supports remote APN settings configuration by SMS.

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47702
General information
PurposeVehicle
InstallationNot required
Special form factorOBDII Dongle
Housing
Weight55 g (1.94 oz.)
Size65x61x26 mm (2.56x2.4x1.02 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
Number of outputs1
ACC/Ignition inputFeature already supported
Feature already supported in
OutputsFeature already supported
Feature already supported in
Hardware features
Battery capacity180 mAh
Feature already supported in
Built-in battery
Feature already supported in
Hardware extras
Driver ID readingFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
OdometerFeature already supported
Feature already supported in
ECO drivingFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Car crashFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
CAN/OBDII reading
CAN/OBDII parametersFuel level, fuel consumption, engine RPM, throttle position, speed, engine load, coolant temperature, DTC error codes and other
Feature already supported in
Check engine lightFeature already supported
Feature already supported in
DTC codes readingFeature already supported
Feature already supported in
Remote management
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)Feature already supported
Feature already supported in
Forced LBS location update over GPRSFeature can be supported upon request
Feature can be supported upon request
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request
Certification
CE
Feature can be supported upon request
FCC
Feature can be supported upon request

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47702

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following command to the device:

APN;<apn>;<apnUser>;<apnPass>
GIP;217.23.132.215;47702;0

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “IMTSA TR2-OBD”