Granit-Navigator 04

Manufacturer:

Granit-Navigator 04 is a tracking device which allows to control vehicles in real time.

Granit-Navigator 04 description

Granit-Navigator 04 is a tracking device which allows to control vehicles in real time.

System composition:

The dispatch center consists of a computer connected to the Internet.
The mobile unit is easily installed under the windshield of the vehicle and is powered from the on-board network by a voltage in the range of 10-30V. The mobile unit includes a GPS receiver, GSM / GPRS modem, a non-volatile memory module and a battery for autonomous power supply. To implement voice communication, a headset and an external loudspeaker are connected to the unit. The unit has analog-digital inputs and digital outputs, which allows you to connect to it both control sensors and actuators.

Location and tracking

  • Continuous tracking mode

Mobile networks

  • 850/900/1800/1900 MHz
  • 2G Network

Inputs and outputs

  • Analog inputs
  • Digital outputs

Other features

  • Good GPS Performance
  • LED indication

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47720
General information
PurposeVehicle
InstallationDIY
Housing
Weight100 g (3.53 oz.)
Size120x65x30 mm (4.72x2.56x1.18 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
Analog inputsFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
OdometerFeature already supported
Feature already supported in
Self monitoring
GNSS signal levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over SMS)Feature already supported
Feature already supported in
Remote outputs controlYes (over SMS)
Feature already supported in

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47720

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device via SMS:

BB+PRIP=217.23.132.215,47720,<del>,<ntel>,<APN>,<User>,<Password>, <ip2>,<port2>

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Granit-Navigator 04”