Galileosky Base Block description
Galileosky Base Block is a compact and lightweight GPS/GLONASS vehicle tracker. It has 4 universal inputs that can be customized as analog, impulse or frequency ones. RS-485 interface and a possibility of connecting to CAN-bus of the vehicle make its range of functions very wide. Metal body and IP54 protection make it extremely durable.
Location and tracking
- GPS, GLONASS
- Continous tracking mode
Inputs and outputs
- 4 inputs
- 2 outputs
- External CAN Interface
- USB 2.0
- IP54 protection
- Metal/plastic body
- 2Mb internal memory
- -40 … +85 C operating temperature
|Server IP Address||18.104.22.168|
Automatic activation (recommended)
The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.
You also need to keep the device with initial factory settings, in particular:
- Do not set any password, keep it clear (as by default)
- Do not set any master number prior to the device activation
- Do not set local Time zone, it must be UTC+0h (as by default)
In case automatic activation failed, you can try to register the device manually by sending following commands to the device:
The <APN> parameters depend on your GSM carrier.