Eelink GPT18

Manufacturer:

Eelink GPT18 is the personal GPS tracker, which supports frequences 850/900/1800/1900 MHz, which are universal in the world. Device has high level waterproof protection and it is also easy to use. If Eelink GPT18 tracker will be in the area with the weak GPS signal, it will use LBS technology to receive gps coordinates. This tracker is good and cheap choice, which will help you to know where your relatives are.

Eelink GPT18 description

Eelink GPT18 is the personal GPS tracker, which supports frequences 850/900/1800/1900 MHz, which are universal in the world. Device has high level waterproof protection and it is also easy to use. If Eelink GPT18 tracker will be in the area with the weak GPS signal, it will use LBS technology to receive gps coordinates. This tracker is good and cheap choice, which will help you to know where your relatives are.

Location and tracking

  • Supports GPS and GLONASS
  • Continuous tracking mode
  • LBS mode

Mobile networks

  • 850/900/1800/1900 MHz
  • 2G Network

Power supply

  • Build-in battery (470 mAh)

Other features

  • Emergency button
  • Automatic power on & off
  • OLED Screen, Time/Date/Week Display
  • Silicone Strap, IP67 Waterproof Level

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47723
General information
PurposeVehicle
InstallationNot required
Housing
Weight40 g (1.41 oz.)
Size40x35x14.8 mm (1.57x1.38x0.58 in)
GNSS Location
Internal antenna (GNSS)
GPS
GLONASS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Hardware features
Emergency buttonFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47723

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device via SMS:

APN,{apn},{apn_user},{apn_pass}#
SERVER,0,{server_ip},47723#

The <APN> parameters depend on your GSM carrier.

via GPRS:

COLLECT,120,100,30,60,1#
GSM,1#
GPS,1#

Reviews

There are no reviews yet.

Be the first to review “Eelink GPT18”

Related Articles