Cantrack T80

Manufacturer:

Cantrack T80 is a basic vehicle GPS OBDII tracker that can track car’s position in real-time, as well as read basic car’s parameters and statistics.

Cantrack T80 description

Cantrack T80 is a basic vehicle GPS OBDII tracker that can track car’s position in real-time, as well as read basic car’s parameters and statistics.

Location and tracking

  • uBlox GPS chip
  • Continuous tracking mode
  • no LBS support

Mobile networks

  • Standard quad-band 850/900/1800/1900MHz
  • Only 2G networks

Power supply

  • Powered from the OBD port
  • Working voltage 12-36V

Inputs and outputs

  • Connection to OBDII port

Other features

  • Internal memory for storing GPS data when connection to server is unavailable
  • LED indication

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47700
General information
PurposeVehicle
InstallationDIY
Housing
Weight230 g (8.11 oz.)
Size100x60x23 mm (3.94x2.36x0.91 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Tracking features
Tracking modesContinuous
OdometerFeature already supported
Feature already supported in
ECO drivingFeature already supported
Feature already supported in
Events monitoring
External power cut offFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
CAN/OBDII reading
CAN/OBDII reader typeInternalFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47700

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

AT+APN={apn},{apn_user},{apn_pass}
AT+HOSTS=217.23.132.215,47700

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Cantrack T80”