CalAmp LMU-3030

Manufacturer:

CalAmp LMU-3030 series provides a range of easy-to-install cost optimized vehicle tracking devices designed to meet the needs of the growing connected car market. The LMU-3030 series delivers access to the vehicle diagnostics interface ideal for insurance applications, driver behavior management, auto rental and automotive applications in passenger or light-duty vehicles.

CalAmp LMU-3030 description

CalAmp LMU-3030 series provides a range of easy-to-install cost optimized vehicle tracking devices designed to meet the needs of the growing connected car market. The LMU-3030 series delivers access to the vehicle diagnostics interface ideal for insurance applications, driver behavior management, auto rental and automotive applications in passenger or light-duty vehicles.

Location and tracking

  • GPS Support
  • Continuous tracking mode
  • LBS Support

Mobile networks

  • 800/850/900/1700/1900/2100 MHz
  • 2G / 3G Network

Power supply

Operating Voltage

  • 9-16 VDC Vehicle Systems

Sleep Mode

  • 4.9mA @ 13V (deep sleep )
  • 83mA @ 13V (normal operation)
  • 66mA @ 13V (SMS+UDP connection, GPS off)
  • 114mA @ 13V (continuous transmit)

Other features

  • Remote management
  • Built-in OBD-II/EOBD-II interface via J1962 compliant connector

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47710
General information
PurposeVehicle
InstallationDIY
Special form factorOBDII Dongle
Housing
Weight52 g (1.83 oz.)
Size43x64x25 mm (1.69x2.52x0.98 in)
GNSS Location
Internal antenna (GNSS)
GPS
Assisted GPS
Connectivity
Cellular network typeHPSA/UMTS 850/900/1900/2100
Internal antenna (Connection)
Cellular network generation2G, 3G
Interfaces
Number of inputs (all types)1
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Hardware extras
Voice listeningFeature can be supported upon request
Feature can be supported upon request
Tracking features
Tracking modesContinuous
Feature can be supported upon request
Location by Cell IDFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
Network operator IDFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
CAN/OBDII reading
CAN/OBDII reader typeExternalFeature already supported
Feature already supported in
CAN/OBDII parametersSpeed, fuel level, fuel consumption, engine RPM, throttle position, mileage, inst. fuel consumption, engine hours
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Forced GNSS location update over SMSFeature already supported
Feature already supported in

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47710

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

!RP,2306,0,<apn>
!RP,2314,0,<apnUser>
!RP,2315,0,<apnPass>
!RP,1024,35,255,1
!RP,769,0,47710
!RP,2319,0,<server_ip>
!RP,768,0,<server_ip>
!RP,1024,25,255,2
!R3,70,0
!R3,1,123

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “CalAmp LMU-3030”