Bitrek BI 530R TREK

Manufacturer:

BI 530R TREK is an extremely lightweight GPS/GlONASS tracker that provides a cost-effective solution for your tracking needs. This device allows you to connect various additional sensors for tracking things like ignition, temperuture, fuel levels and driver identification.

Bitrek BI 530R TREK description

BI 530R TREK is an extremely lightweight GPS/GlONASS tracker that provides a cost-effective solution for your tracking needs. This device allows you to connect various additional sensors for tracking things like ignition, temperuture, fuel levels and driver identification.

Location and tracking

  • GPS, GLONASS
  • Continous tracking mode

Mobile networks

  • Class 10 GPRS
  • 2G

Power supply

  • Build-in 130 mAh battery

Inputs and outputs

  • 2 analog inputs
  • 3 discrete inputs
  • 2 outputs
  • RS-485 interface

Other features

  • IP54 protection
  • Can store up to 50 000 points in memory
  • Operating temperature -30° … +80° C

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47776
General information
PurposeVehicle
Housing
Weight75 g (2.65 oz.)
Size77x96x14 mm (3.03x3.78x0.55 in)
GNSS Location
Internal antenna (GNSS)
GPS
GLONASS
Connectivity
Cellular network typeGSM 900/1800
Internal antenna (Connection)
Cellular network generation2G
Interfaces
RS485 interface
Number of outputs2
Number of inputs (all types)5
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
Impulse inputsFeature can be supported upon request
Feature can be supported upon request
Frequency inputsFeature already supported
Feature already supported in
Hardware features
Battery capacity130 mAh
Feature already supported in
Built-in battery
Feature already supported in
Internal temperature sensorFeature already supported
Feature already supported in
Hardware extras
Fuel level sensor readingFeature already supported
Feature already supported in
Driver ID readingFeature already supported
Feature already supported in
External temperature sensor reading
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
OdometerFeature already supported
Feature already supported in
Self monitoring
Network operator IDFeature already supported
Feature already supported in
Network roaming statusFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
CAN/OBDII reading
CAN/OBDII reader typeExternalFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over SMS)Feature already supported
Feature already supported in
Remote outputs controlYes (over SMS)Feature already supported
Feature already supported in

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47776

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device vis SMS:

setparam 0245 {server_hostname};setparam 0246 47776;setparam 0242 {apn};setparam 0243 {apn_user};setparam 0244 {apn_pass};
setparam 0903 100;setparam 0011 100;setparam 0012 300;setparam 0013 10;setparam 0470 1;setparam 0474 3;setparam 0420 1;setparam 0410 1;setparam 0450 1;
setparam 0440 1;

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Bitrek BI 530R TREK”