Manufacturer:

ATrack AY5i can be used as an alternative solution where the monthly charges for the data transmission over wireless cellular networks are expensive. The AY5i can be deployed directly into your existing WiFi infrastructure and we make the connection to LAN process as hassle-free as possible.

ATrack AY5(i) description

Embedded with the leading-edge GPS and WiFi technologies, the ATrack AY5i can be used as an alternative solution where the monthly charges for the data transmission over wireless cellular networks are expensive. The AY5i can be deployed directly into your existing WiFi infrastructure and we make the connection to LAN process as hassle-free as possible. Simply just apply relevant WiFi settings to the AY5i and you are good to go!

Package contents

ATrack AY5 package contains the following device/accessories:

  • Device
  • Antenna
  • Serial Cable
  • GPS Antenna
  • Power/IO Cable

Inputs/Outputs

To support a wide range of hardware applications, the AY5 is equipped with a large number of inputs and outputs:

  • 6 (3 Positive Triggered Inputs, including ACC; 3 Negative Triggered)
  • 4 Open-Collect Output (Max. sink current 300mAMAX)
  • 3 (0 ~ 40 VDC, 0 ~ 5 VDC, 12 bits resolution)
  • 1-Wire: Support up to 1 iButton® and 4 temperature sensors

Product features:

  • Able to establish a fast connection to LAN with any WiFi hotspot
  • GPS antenna tampering detection & reporting
  • GPS signal reception timeout detection & reporting
  • Configurable Tracking & Logging Settings
  • 64 user defined geo-fences in circular, rectangular and polygonal shapes
  • Integrated GPS or Vehicle Speed Sensor (VSS) odometer support
  • User defined reports & schedule control for all reports
  • Ignition and Engine ON/OFF detection
  • Speeding, idle reports, vehicle tow alert detection & reporting
  • Configurable power management
  • Max. 140,000 log and 21,000 queue messages
  • Built-in 3-axis G-sensor
  • AES-128 data encryption
  • Support 1-Wire® applications
  • Support Garmin® FMI 2.0

Location and tracking

ATrack AY5 is embedded with GPS. It is also available as GPS/GLONASS version.

As the back-up, when no satellites signals are available, it uses Cell ID location (also known as LBS-tracking).

Power supply

External power supply might be 8-40V, which makes possible to use ATrack AY5 with all car models.

Local and remote management

ATrack AY5 can be fully controlled over GPRS. There is also a wide list of SMS commands in a human-friendly format, on which device always replies back. It supports remote APN settings configuration by SMS.

LED Indication

ATrack AY5 model has three LEDs:

  • Power LED – indicates power status
  • GPS LED – indicates GPS signal
  • GSM LED – indicates GSMS signal

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47712
General information
PurposeVehicle
InstallationProfessional
Housing
Weight100 g (3.53 oz.)
Size100x65x26 mm (3.94x2.56x1.02 in)
GNSS Location
External antenna (GNSS)
GPS
GLONASS
Connectivity
External antenna (Connection)
Interfaces
1-Wire interface
RS232 interface
Number of RS232 interfaces1
Number of outputs4
Number of inputs (all types)9
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
OutputsFeature already supported
Feature already supported in
Hardware features
Battery capacity950 mAh
Feature already supported in
Built-in battery
Feature already supported in
Hardware extras
Driver ID readingFeature can be supported upon request
Feature can be supported upon request
Tracking features
Tracking modesContinuous
Feature can be supported upon request
Location by Cell IDFeature already supported
Feature already supported in
Smart power consumptionFeature already supported
Feature already supported in
OdometerFeature already supported
Feature already supported in
ECO drivingFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Car crashFeature already supported
Feature already supported in
TowingFeature already supported
Feature already supported in
Mobile signal jammingFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)Feature already supported
Feature already supported in
Firmware update OTA
Feature already supported in
Forced LBS location update over GPRSFeature can be supported upon request
Feature can be supported upon request
Certification
EAC
Feature can be supported upon request

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47712

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Reviews

There are no reviews yet.

Be the first to review “ATrack AY5(i)”