ATrack AX7P

Manufacturer:

ATrack AX7P is a vehicle Telematics unit that easily plugs into a vehicle’s OBDII port for simple plug-and-play installation. It supports various cellular network protocols, which makes it compatible with world-wide network operators. AX7P is ideal for applications such as: Usage Based Insurance, Car Rental, Fleet Management, and Teenage Driver Tracking.

ATrack AX7P description

ATrack AX7P is a vehicle Telematics unit that easily plugs into a vehicle’s OBDII port for simple plug-and-play installation. It supports various cellular network protocols, which makes it compatible with world-wide network operators. AX7P is ideal for applications such as: Usage Based Insurance, Car Rental, Fleet Management, and Teenage Driver Tracking.

Location and tracking

ATrack AX7P is embedded with GPS chip. It also supports Assisted GPS (A-GPS) technology. As the back-up, when no satellites signals are available, it uses Cell ID location (also known as LBS-tracking).

The tracking mode is flexible configured: by moving every 100m, and every 60 sec, and on turning on 30 degrees by default.

Mobile networks

With Quad-band GSM module ATrack AX7P can be operated all over the world.

Features

ATrack AX7P has following features:

  • Flexible wireless network options
  • Small and easy plug-and-play installation
  • Ultra low current consumption in deep sleep mode
  • Data communication by SMS/USSD/TCP/UDP
  • High GPS sensitivity with A-GPS support
  • GSM jamming detection
  • Built-in 3-axis G-sensor
  • FOTA firmware upgrade using FTP
  • Configurable Real Time Tracking & Logging
  • 32 user defined geofences
  • Build-in buzzer for configurable event
  • Roaming preference settings
  • Harsh driving behavior events
  • Configurable power management
  • OBDII data collection
  • Fuel economy calculation
  • User defined OBDII event transmission
  • OBDII Diagnostic trouble code reporting
  • Intelligent event control engine

 

Power supply

External power supply might be 8-40V, which makes possible to use ATrack AX7P with all car models.

Also AX7P features built-in internal 3.7V 90 mAh rechargeable Lithium-ion polymer battery.

With an integrated J1962 connector, an extremely compact design powered through the OBDII port, and low power consumption, ATrack AX7P can be installed in matter of seconds which substantially reduces the high cost of installation.

Comparing this device to the AX7, it has the support of FMS/J1939.

Local and remote management

ATrack AX7P device is capable of firmware update and configuration over-the-air.

In case you are not able to configure device over the air, manual management over SMS-commands and configuration software is also available.

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47712
General information
PurposeVehicle
InstallationDIY
Special form factorOBDII Dongle
Housing
Weight50 g (1.76 oz.)
Size50x46x25 mm (1.97x1.81x0.98 in)
GNSS Location
Internal antenna (GNSS)
GPS
Assisted GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G, 3G
Interfaces
Number of inputs (all types)3
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Hardware features
Battery capacity90 mAh
Feature already supported in
Built-in battery
Feature already supported in
Accelerometer
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
Smart power consumptionFeature already supported
Feature already supported in
OdometerFeature already supported
Feature already supported in
ECO drivingFeature already supported
Feature already supported in
Events monitoring
External power cut offFeature already supported
Feature already supported in
Car crashFeature already supported
Feature already supported in
DetachFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
CAN/OBDII reading
CAN/OBDII reader typeFeature already supported
Feature already supported in
CAN/OBDII parametersFuel level, fuel consumption, engine RPM, throttle position, speed, engine load, coolant temperature, DTC error codes and other
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Firmware update OTA
Feature already supported in
Forced LBS location update over GPRSFeature can be supported upon request
Feature can be supported upon request
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request
Certification
CE
Feature can be supported upon request

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47712

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following command to the device:

AT$GPRS+456=1,”{apn}”,”{apn_user}”,”{apn_pass}”,”tracker.navixy.com”,47712,0,1,10,0,1

The <APN> parameters depend on your GSM carrier, and should be applied without {}.

Reviews

There are no reviews yet.

Be the first to review “ATrack AX7P”