Arnavi Integral-2

Manufacturer:

Arnavi Integral 2 is a GPS tracker which has built-in GPS and GSM antennas. The tracker is designed for remote monitoring of mobile objects and can be used in conjunction with any compatible software. Integral 2 model has 3 universal inputs, which will be very useful for fleet management and monitoring. Also this tracker has 2 digital outputs, which will help you in vehicle control.

Arnavi Integral-2 description

Arnavi Integral 2 is a GPS tracker which has built-in GPS and GSM antennas. The tracker is designed for remote monitoring of mobile objects and can be used in conjunction with any compatible software. Integral 2 model has 3 universal inputs, which will be very useful for fleet management and monitoring. Also this tracker has 2 digital outputs, which will help you in vehicle control.

Location and tracking

  • GPS, GLONASS support
  • Continuous and interval tracking modes
  • LBS support

Mobile networks

  • GSM Quad-band
  • 2G Network

Power supply

  • Build-in battery (800 mAh)
  • External power supply (7-44 V)

Inputs and outputs

  • 3 Universal inputs
  • 2 Digital outputs

Other features

  • External CAN reader
  • Remote management

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47756
General information
PurposeVehicle
InstallationProfessional
Housing
Weight60 g (2.12 oz.)
Size70x53x22 mm (2.76x2.09x0.87 in)
GNSS Location
Internal antenna (GNSS)
GPS
GLONASS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
1-Wire interface
RS485 interface
Number of outputs2
Number of inputs (all types)3
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
Impulse inputsFeature already supported
Feature already supported in
Frequency inputsFeature already supported
Feature already supported in
Hardware extras
Fuel level sensor readingFeature already supported
Feature already supported in
Driver ID readingFeature already supported
Feature already supported in
External temperature sensor reading
Feature already supported in
Tracking features
Tracking modesContinuous, Interval
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
OdometerFeature already supported
Feature already supported in
Events monitoring
External power cut offFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
CAN/OBDII reading
CAN/OBDII reader typeExternalFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)
Feature already supported in
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47756

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

123456*SETP*#2={apn},{apn_user},{apn_pass}
123456*SETP*#1={server_hostname},47756
123456*SETP*#5=100,15,50,120

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Arnavi Integral-2”