Albatross S8.5

Manufacturer:

Albatross S8.5 Terminal allows you to connect modules to support advanced transport fleet managing projects; full logistic data reading from the bus CAN/FMS/J1708/OBDII; remote driver cards DDD downloads and mas memory; read drivers status from the bus D8; communication and transport management on a connected GARMIN (FMI) navigation.

Albatross S8.5 description

Albatross S8.5 Terminal allows you to connect modules to support advanced transport fleet managing projects; full logistic data reading from the bus CAN/FMS/J1708/OBDII; remote driver cards DDD downloads and mas memory; read drivers status from the bus D8; communication and transport management on a connected GARMIN (FMI) navigation.

Features:

  • CAN module – reads data from the CAN bus (J1939, J1708, J1587, FMS) – over 550 vehicles supported! (Full CAN module description on a separate data sheet)
  • GSM/GPRS Module: 850/900/1800/1900 MHz SIMCOM/QUECTEL with JAMMING function
  • GPS Quectel L10/L70 receiver with ANTY-JAMMING function
  • Advanced filters of analog inputs (analog floats; fuel probes) with data support after the loss of the main power supply
  • External active GPS antenna (3 meter / SMA connector)
  • External quad band antenna (3 meter / SMA-RP connector
  • Internal sustaining clock RTC (Real Time Clock)
  • External RS-232-TTL (optional; RS-232, RS-485)
  • Internal battery 550 mAh (optional); Charging control
  • ABS casing: 89x63x30 [mm]
  • Memory archive – minimum of 24.000 events (up to 48.000)
  • Signaling operation diodes of GSM and GPS
  • Full support of 1-Wire DALLAS protocol (6 thermometers, DALLAS / RFID identification)
  • Alarm, which informs that the GPS antenna is dissconnected – real-time monitoring
  • Operating a dedicated Albatross Wi-Fi module which enables a communication between GPRS-S8 terminal and a communicator / tablet using Wi-Fi networks
  • Full support for Mobileye technology
  • Full solutions support MIDAS MOVON
  • Authoring solution of protecting inputs of the device (power; ignition switch; analog inputs) – these inputs are damage resistant (e.g surge in vehicle installation)
  • Incremental firmware – backward compatible always contains all the device functions , which ensures ease of managing software versions; Files to update are delivered directly to a partner in order to further updates by using the FTP server
  • Optional support of 3D sensor in order to detect accident; tows; car cullets
  • ImmoDALLAS – an additional security for customers vehicle. The device activates the output in case of detecting the absence of authorization (DALLAS, RFID); The device allows you to save up to 256 identification numbers of drivers!
  • Ignition signal detection using a dedicated analog input, the main power supply voltage or from CAN bus
  • Ability to implement a dedicated logic functions; commands and a help of handling modules on partners demand in case of further cooperation

Applications:

  • Vehicle Real-time Tracking
  • Vehicle Data Warehouse
  • Vehicle Security / Rescue / Anti-hijack
  • Mobile Asset Tracking
  • Fleet Management
  • Location Based Service

Inputs / Outputs

  • 2 reacting to mass inputs
  • 2 open collector outputs
  • 3 analog inputs (for ignition voltage measurement; fuel probes)
  • 1-Wire Input (identification of drivers; temperature measurement; DALLAS, RFID)
  • RS-232-TTL communication port (default)
  • RS-232 communication port (optional)
  • RS-485 communication port (optional)
  • Counting input
  • CAN J1939/J1708/J1587/FMS/OBDII/TACHO

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47699
General information
PurposeVehicle
InstallationProfessional
Housing
Weight110 g (3.88 oz.)
Size89x55x25 mm (3.5x2.17x0.98 in)
GNSS Location
Internal antenna (GNSS)
External antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
External antenna (Connection)
Cellular network generation2G
Interfaces
1-Wire interfaceFeature already supported
Feature already supported in
RS232 interfaceFeature already supported
Feature already supported in
RS485 interface
Feature already supported in
Number of outputs2
Feature already supported in
Number of inputs (all types)5
Feature already supported in
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
Impulse inputsFeature can be supported upon request
Feature can be supported upon request
OutputsFeature already supported
Feature already supported in
Hardware features
Battery capacity550 mAh
Feature already supported in
Built-in batteryOptional
Feature already supported in
Hardware extras
Emergency buttonFeature already supported
Feature already supported in
Driver ID readingFeature already supported
Feature already supported in
External temperature sensor readingFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous, Interval
Feature already supported in
OdometerFeature can be supported upon request
Feature can be supported upon request
ECO drivingFeature already supported
Feature already supported in
Events monitoring
External power cut offFeature already supported
Feature already supported in
Car crashFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature can be supported upon request
Feature can be supported upon request
Network operator IDFeature can be supported upon request
Feature can be supported upon request
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
CAN/OBDII reading
CAN/OBDII reader typeExternalFeature already supported
Feature already supported in
CAN/OBDII parametersSpeed, fuel level, fuel consumption, engine RPM, throttle position, mileage, inst. fuel consumption, engine hours
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)Feature already supported
Feature already supported in
Firmware update OTA
Feature already supported in
Certification
CE
Feature already supported in
FCC
Feature already supported in

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47699

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following command to the device:

$AL+COMM=0000,3,{sms_gateway},,{apn},{apn_user},{apn_pass},1,217.23.132.215,47699,300,rn

$AL+UNPM=0000,{device_id_generated_by_api_server},0000,9998,7,7,7,7,4,10rn

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Albatross S8.5”